Higher Security Systems - SeceuroShield 7501 & SeceuroVision 7501 ‘Insurance Approved’ Rolling Shutter
SeceuroShield 7501 & SeceuroVision 7501 manufactured by SWS UK are Level 1
Insurance Approved rolling shutters with Secured by Design status.
Tested to Loss Prevention Standard LPS 1175-1, it is suitable for all office, commercial and industrial applications.
Available solid or perforated or with a mix of both, when only partial vision is required, it is suitable for internal and external positions*.
Can span widths up to 6000mm overall end guides (5820mm clear opening width).
*SeceuroShield 7501 and SeceuroVision 7501 can only be installed when fitted behind the opening with the head box above the structural opening. It can be fitted to a timber frame, block, brickwork or steelwork.
If reveal fixing is required, steel angles are required to both sides of the opening reveal to which the shutter will be fixed.
Available with manual push up/pull down operation or with single phase tubular motor operation.
Below 3000mm overall (2820mm clear) wide a key lock must be included in the bottom rail.
Sizes in excess require either a bottom rail key lock or a pair of guide mounted bullet locks.
Locks MUST be unlocked before electric operation.
Supplied as standard with guides and hood in White RAL 9010 or Brown RAL 8014, with galvanised curtain and bottom rail.
Can be powder coated in a range of BS/RAL colours.
Plastisol finish also available to the external face of the shutter curtain. (Bottom rail will remain galvanised or can be powder coated to match the guides/hood finish).
Return to Higher Security Systems intro page