SD600 Insulated Sectional Overhead Door
Insulated sectional overhead doors are manufactured to suit individual openings for all types of commercial and industrial buildings where the need for energy conservation is desired.
Glazed doors with either single or double glazing are available.
Doors are assembled from 610mm x 40mm thick panels, horizontally ribbed, with a foamed core of rigid polyurethane giving a U value of 0.47 W/m²/ºC.
Each panel has rebated meeting edges with built in seals. The door is fully sealed at top, bottom and sides by neoprene seals.
Panels are available as standard in the following colours:
Kingspan XL200 Leathergrain is also available in the following colours:
Powder Coated to a standard BS/RAL colour to the outer face is also available. Click on BS4800 or RAL Colour Chart graphics to view available colours (PDF)
The internal face is finished white.
Available in all forms of lift, they can be operated manually (push up/pull down), by hand chain or electric.
A range of control options is available, including radio control, radar and induction loop.
Support is required for the tracks and the spring units. We recommend the provision of a timber frame on masonry openings to ensure a perfectly flat surface. On steelwork the doors may be fitted direct.
A key lock can be supplied (for any operation) which gives the facility for external key access.
Recommended threshold detail
Due to unpredictable floor conditions it is impossible to guarantee a perfect floor seal, therefore to minimise the ingress of water we recommend the following:
The weight of the door is 15 kg/m² (40mm panel), 20 kg/m² (80mm panel)
Return to Insulated Doors intro page